The SPEEDLine toothed belt drive is used for applications that require high speeds at average force and precision.

Technical features:

• max. speed 10 m/s (33 ft/s)
• max. acceleration 40 m/s2 (131 ft/s2)
• min. repeatability ± 0.05 mm (0.002 in) even at high feed forces
• max. feed force 5 kN (1124 lbf)
• ATL toothed belt with steel reinforcement especially suitable for linear drive units, higher performance
• The toothed belt can be re-tensioned and exchanged comfortably without dismounting the load (only WH50/80/120), thus reducing your service costs.
• FEA analysis helps model and optimize the profile and the whole linear axis. The result: highest performance and reliability.
• Precise positioning is made possible by a polished linear guide with a high degree of guide accuracy. A smaller motor can be added thanks to the low coefficient of friction. Rubber wipers protect the mechanism from dirt, thus increasing service life.
• Central lubrication - The linear guide system is conveniently re-lubricated from a central point. Whether by hand or automatically, maintenance is now a simple matter.
• Completely new arrangement of the roller guideway - The H-Type arrangement of guidance allows high forces and moments and thereby the choice of a smaller size. Your benefit: lighter and more economical constructions.

WIESEL™ SPEEDLine® WH50, WH80, WH120

     With the WIESEL™ SPEEDLine® single-axle solutions can be realized as well as two and three-dimensional handling systems.

WHZ50, WHZ80

     The WIESEL™ SPEEDLine® Z-axis is especially suitable for vertical movements. The reduced mass to be moved together with the short design allow higher dynamics and loads.

Product	Size	Max Stroke (mm)	Max Speed (m/s)	Repeatability (mm)	Fn (kN)	Product Sheet (PDF)	Drawing Downloads (DWG)/(DXF)/(Zipped STP)
Wiesel SPEEDLine	WH40	2000	3.0	0.05	315
	WH50	3000	6.5	0.05	670
	WH80	11000	10.0	0.05	2700
	WH120	11000	10.0	0.05	5000
	WHZ50	1500	6.5	0.05	670
	WHZ80	3000	10.0	0.05	1480