 Precision Technology electromechanical linear actuators are a combination of ball-screw or trapezoidal screws driven via electrical motors which move a cylinder spindle, thus controlling both speed and position. Standard strokes range from 100 to 1.500 mm. Different lengths are available upon request. The maximum dynamic load capacity is 75.000N (8.5 Ton) and they can be installed on practically any kind of industrial machine where movement is required without using manual, pneumatic or hydraulic methods.
View Product Listing
- Easy to install. They can be fixed horizontally, vertically or inclined.
- Independent of other equipment.
- They move at a constant speed.
- Zero power consumption when not operating.
- Quiet operation.
- Constant thrust in both directions.
- Insensitive to temperature change.
- Low maintenance.
- Wide range of speeds available.
- Replacements for hydraulic and pneumatic cylinders.
The screw type can be specified as either a ball-screw or a trapezoidal screw. The ball-screw has a high efficiency due to the low frictional losses imparted by the rotation of ball bearings, they are generally not self locking and can be used for high duty cycles. If the load is low and the duty cycle is low, that is to say if the actuator works periodically with long stops, a trapezoidal screw will suffice.
M100 Basic Model Actuator
The basic model actuator has been designed to easily attach several types of drive i.e. manual, electrical, mechanical, etc. The linear speed is determined by the RPM of the motor and the pitch of the screw. The thrust depends on the screw pitch and motor power.
M205 Actuator For In-Line Motor Drive
The M205 actuator has been designed for handling high loads with low to medium speeds.
Components of the actuator:
- Actuator: Basic model.
- Fixing: Trunion mount.
- Drive: Inline Gear Box with a wide range of gear ratios.
M501 Actuator For Right Angled Belt Drive And Parallel Motors
This actuator has been designed for medium loads and a wide range of speeds. It needs to be mounted with a motor or motor gearbox combination and a toothed belt drive. A braked motor can be supplied if needed.
Components of the actuator:
- Actuator: Basic model.
- Fixing: Trunion / clevis mount.
- Driving: Any kind of motor with toothed belt drive.
M505 Actuator With Integrated Right Angled Bevel Gear Box
The M505 actuator has been designed for mounting several units in parallel and the drive to be at 90°.
*For sizes F40 & F50 get in touch with Precision Technology
M601 Actuator For Right Angled Gear Drive And Motor
The M601 actuator has been designed for loads up to 750.000N and speeds ranging from 1 and 200 mm/sec.
Components of the actuator
- Actuator: Basic model.
- Fixing: Via motor housing.
- Driving: Low profile gearbox. Wide range of gear ratios.
M605 Actuator For In-Line Motor Drive
The M605 actuator has been designed to work at high travel speed with low-medium loads.
Components of the actuator
- Actuator: Basic model.
- Fixing: Trunion mount.
| Product |
Size |
Max Stroke (mm) |
Max Speed (m/s) |
Repeatability (mm) |
Fn (kN) |
Product Sheet
(PDF) |
Drawing Downloads
(DWG)/(DXF) |
| VERSARam® Basic Model M100 |
M100-F16 |
600 |
|
|
2.5 |
 |
  |
| |
M100-F20 |
700 |
|
|
5 |
|
|
| |
M100-F30 |
1500 |
|
|
15 |
|
|
| |
M100-F40 |
2000 |
|
|
25 |
|
|
| |
M100-F50 |
2000 |
|
|
70 |
|
|
| VERSARam® Inline gearbox M205 |
M205-F20 |
700 |
|
|
5 |
|
|
| |
M205-F30 |
1500 |
|
|
15 |
|
|
| |
M205-F40 |
2000 |
|
|
25 |
|
|
| |
M205-F50 |
2000 |
|
|
70 |
|
|
| VERSARam® Right Angled Belt
M501 |
M501-F16 |
600 |
|
|
1.8 |
|
|
| |
M501-F20 |
700 |
|
|
5 |
|
|
| |
M501-F30 |
1500 |
|
|
9 |
|
|
| |
M501-F40 |
2000 |
|
|
25 |
|
|
| |
M501-F50 |
2000 |
|
|
30 |
|
|
| VERSARam® Integrated right
angle gear boxes M505 |
M505-F16 |
600 |
|
|
2.5 |
|
|
| |
M505-F20 |
700 |
|
|
5 |
|
|
| |
M505-F30 |
1500 |
|
|
15 |
|
|
| VERSARam® Right angle gear and
motor mount M601 |
M601-F20 |
700 |
|
|
5 |
|
|
| |
M601-F30 |
1500 |
|
|
15 |
|
|
| |
M601-F40 |
2000 |
|
|
25 |
|
|
| |
M601-F50 |
2000 |
|
|
70 |
|
|
| VERSARam® Inline motor
mount M605 |
M605-F16 |
600 |
|
|
2.5 |
|
|
| |
M605-F20 |
700 |
|
|
5 |
|
|
| |
M605-F30 |
1500 |
|
|
15 |
|
|
| |
M605-F40 |
2000 |
|
|
25 |
|
|
| |
M605-F50 |
2000 |
|
|
70 |
|
|
|
